Night VFR experience

In addition to my basic instrument flying module I have decided to add a night VFR rating. Basically it is complicated to fly night vfr in Spain, you need to request some 10-14 days in advance a permission, which has to be granted and than you are allowed to fly during the night. So basically even if you have the rating, you are not allowed to land after sundown, only if you have a special permission by the authorities… Spain is simply different. Even our first training flight had to be cancelled because the ATC told us that the permission issued by the authorities was not complete… So the FI had one week to clear all the necessary paperwork and it seemed our permission was ok, only there was some misunderstanding… Finally we got to the plane, which was after a regular check, so everything was in perfect state, except the landing light seemed to not be working… It seemed we had to cancel our flight again. But luckily we had the maintenance guy with us, so he was able to fix the problem and we were ready to go.

Getting our landing light fixed

Getting our landing light fixed

The taxiing was quite easy, there was sufficient light outside.

Taxi via Juliet to the holding point of the RWY 03L

Taxi via Juliet to the holding point of the RWY 03L

In the cockpit there was of course less light than during the day, so this was already the first difference. Engine run-up, all the checks following the checklist we were cleared to line up and wait on the runway 03L.

Line up and wait 03L, Canavia 71

Line up and wait 03L, Canavia 71

The things started to get more serious, haha. The big question was: how is going to be once in the air? The clearance for takeoff came from the tower, so the answer on my question was not far away… Full throttle, paramaters in green, speed alive, rotate into the night. Looking more inside on the instruments than outside; for correct speed, climb, altitude… 500 feet, flap 0, fuel pump off, landing light off and following right turn into the dark. Strange thing is, you don’t realize how deep the darkness bellow the plane is… On the top of that, we had to hold over the bay during the first circuit, so I had to watch the instruments to make a couple of 360 degree turns without seeing any light. I thought always, that from the circuit the runway light could be seen, but they are not! The first 2 circuits were a bit more complicated, but after that I started to get to used to it… When turning on base, lights of some villages could be seen which was really a nice feeling to get again some visual references…

Final Rwy 03L

Final Rwy 03L (night VFR)

There was a wind from the north between 20-25 knots, which gave us 11 knots crosswind component during the approach and the landing on the RWY 03L. It complicates the practicing of the landings in the night a little bit. Or better said quite complicated… I was hoping to have winds calm as it should be in the night, but it was not the case this time :-). There was also a turbulence bellow 300 feet on final so it was tough work to keep the plane leveled. Crosschecking the instruments, ILS, speed, horizon getting safe on the ground. Hovewer the landings were not so great as I would have expected. Still have 3,5 hours to fly, and I already look forward to it! Finaly I made 12 landings (without counting the bounced ones, lol), and made these with the plane this beautiful drawings on the screen of my ipad:

Today’s flight…

Today’s flight… 🙂

 

After my first successful night flight

After my first successful night flight

 

Safe landings!